2152: C2152 Solve the Problem

C2152 Solve the Problem

The car was dragged back to the garage.1

The entire car had completely gotten rid of the traces of the previous Steyr heavy truck. The entire driver's seat looked rather modern. It could be said that... This Heavy Card was a product of the Han Country's Heavy Card industry. It was a boxing product that walked towards the world.

When will it become a truly powerful country? Of course, it was to let Han Country make a world of products. Only when the industry was strong would it be truly powerful. Now, their own side was on this path, advancing step by step.

After entering the garage, Hee Ribala personally made a move. He turned on the flipping mechanism in front of him and pressed the button. With the sound of the engine ringing, the driver's seat was flipped over.

The heavy truck with a crew cut and the engine were all under his butt. This way, if he wanted to repair the engine, he would have to lift the driver's seat. At the beginning, the driver's seat was fixed. This... The design made it very difficult to maintain the driver's seat. It even required the whole driver's seat to be removed.

Later on, the driver's seat was designed to be able to be turned upside down. Through the driver's seat, the driver's seat could be flipped forward to make space for the driver. Of course, this would also increase the complexity of the machinery.

Flipping it up. In addition to designing the hinge in front of the driver's seat, you also need to put a jack on top of a stick on the hydraulic pump behind you. Once. He got down and flipped the driver's seat. This was called making a mess.

If the engine was often needed for maintenance, it would definitely be a laborious task. Thus, in order to make it convenient for users, this place was designed to be a new device. As long as one pressed the button, the motor would be able to flip the driver's seat.

Regarding this design, Qin Guan gave a thumbs up. Not bad, our heavy cards must be high-end, so we must think of our customers. In this aspect, we have already walked to the front.

Actually, if there was only a problem with the transmission, there was no need to call the cab. After all, the engine was under the driver's seat, and the transmission box was at the back. For this kind of tractor, it was directly exposed to the outside. However, if they wanted to repair it, it would be more convenient to fight like this. Besides, he didn't need to spend too much time.

He propped it up and locked it. A few engineers went up and began to disassemble the clutch. There was a burnt smell coming from inside.

"As expected, it has already been burnt." An engineer said. From the side, he used a crowbar to move it, but the clutch did not move at all.

The engine was always moving, but the wheels weren't. So, in the transmission of power, there was an mechanism that needed to cut off power and combine power at any time. This is the clutch, of course, in the AT-blocking car, the clutch part was replaced by a liquid transformer.

A dual ionization car, if it stopped and stopped for a long time, the clutch would keep coming in contact with the separating part. It would cause the clutch to burn down and cause a serious accident. In order to solve this problem, the method employed by the engineer is to soak the clutch in the liquid and disperse the heat. This was the wet dual ionization, which was a relatively stable solution.

And this kind of heavy card couldn't be used in such a way. It required too much power to transmit, and the clutch was also huge. If it's all soaked in oil, it's too heavy... In fact, this was directly using the original clutch. It was just that there was an air propulsion device installed on it, which was used to replace a person's left foot. In a handbrake car, the left foot was used to control the clutch.

The principle was simple, but the operation was complicated. For example, there was a very special operation to use human feet. It was a semi-ionization. When the ionizer piece started to separate and become combined, the movement needed to be slow, the gentler the better. If the small car was not very obvious... For the heavy truck, if this movement couldn't be slowed down... Then it simply can't be started. When the drivers of some small cars drive a large truck... That was the reason why they couldn't drive at all.

Human operation could go through repeated training, but what about this system?

The system wasn't as smart as humans.

The clutch of the heavy truck was very heavy, and the pressure springs on it were very elastic. On the heavy truck, the clutch was also a way to help. Now, it had been replaced with air pressure operation.

This air pressure operation is very special, either it is not moving. It was the same when the heavy truck was opened. When the brakes were hit, it was the same. Either you don't step on it, or you step on it to death, you absolutely can't drive a small car like that... If you only step on half of it, then the compressed air inside the brake... It will continue to be released, and it won't be long before... When there was no more air inside, it would be sad.

This thing was too violent. So, when pushing the clutch, either it doesn't move, or it goes up in an instant, reacting to the operation. It was a serious setback, and it was just an empty car. If they were to be loaded, it would be a nightmare. Hee Ribala watched as the engineers started to disassemble the car and introduced it to Qin Guan. The situation they were facing now was exactly like this.

After listening to Hee Ribala's introduction, Qin Guan roughly understood. How should he overcome this technical problem? This was very simple. Go into the cemetery and look for information.

There were no civilian vehicles, but military vehicles. As military vehicles continued to develop, it also starts to popularize this kind of AMT converter. Inside the military vehicle, so, just as everyone was researching how to solve this problem... Qin Guan quickly entered the system and took out the information in the system. He found a copy.

How should he solve it? It was very simple, he just needed to push the gas.

If he wanted to directly compress air, that would be very direct. Either they didn't move, or they combined all at once. In comparison, the hydraulic pressure was very mild. So, this kind of AMT heavy card converter... Not directly using air pressure to combine and separate, but using air pressure... It is used on hydraulic oil to provide pressure for hydraulic oil. Using the hydraulic oil to propel the clutch operation, coupled with reasonable training... It came out.

"Here, I have some information for you to study." Qin Guan gestured to the Elementary Scholar. Inside the Elementary Scholar's box... There was already some extra information, not just the design of the clutch. With this... Naturally, it would be easier.

When the engineers received the information, they were all very excited. Indeed, President Qin had solved the problem. Why didn't they think that they could change their way of thinking? This way, the clutch could be more stable!

Also, the training of the transmission box and changing the blocking logic were also very important. President Qin had solved a huge problem at once!

Wait a minute! Why was there an additional sensor here? What is this for? There was no need to trouble President Qin. He could research it himself. That's right. This was a posture sensor used on the slope. Not bad. These ideas to solve problems were very correct!

pqdm.com