244: C244 Become a Part of the Company and Become a Part of It(part Ii)

C244 Become a Part of the Company and Become a Part of It(part Ii)

Although the current production line only has 2. 0T and 3. The 0T engine, but when the production line was first built, it was prepared in accordance with at least six engines, so the production line's production capacity was still very good. Moreover, the entire production line was imported from Swedish, and its technological level could be considered to be mid-level. Its automation level was very high.1

Zhang Yunfeng inspected all the production equipment at present and discovered that there were at least a few parts of this production line that had to be completed by relying on external forces. First was the development of the mold and the manufacturing of finished parts. For example, vat sets, tanks, and so on, these parts had to be made by the supplier. The Volvo did not have the ability to directly produce mold and mass produce them.

This did not have much of an impact on Zhang Yunfeng. He could make these parts himself. He could also entrust the manufacturing of these parts to other parts manufacturers. However, at that time, he would have to use the high-tech raw materials he provided. He would have to rely on the new material business that he and Nie Minhui worked together to build. If he could mass produce them in the industry base in City J, then, he could complete the production of these basic parts.

As long as he could completely solve these spare parts on his own, the production line of the Volvo would be able to achieve total assembly. The production line of the Volvo's turbine amplifier was also very complete, and the processing of the core parts would also be fully automated.

Zhang Yunfeng asked Little Two, "Little Two, look at these pieces of equipment. Can you directly operate them?"

Little Two downloaded almost all the industrial information that could be found on the Internet and analyzed it. He also had a very deep understanding of the current production equipment. After confirming the model of the Volvo production equipment, the waiter said confidently, "Boss. The automatic production equipment of the Volvo used their own central computer and preset software programs. However, these computer programs are all preset by the manufacturer. There is no wireless network function at all. You only need to connect the main computer to another computer with a wireless network function and I will be able to hack into the central computer program of these equipment. Also, the replacement for them will be completed. At that time, the entire production line will be under my control."

Zhang Yunfeng was very satisfied and said, "If that's the case, that would be great. With a slight modification, this place will become your world. At that time, you will be in charge of transforming the technology in the industrial manufacturing technique into reality."

This kind of thing was not vague to the waiter, as long as the control program of this equipment was a computer program. As long as he could hack and modify the program, he would be able to control this production line equipment. It was equivalent to the main control program being replaced by the waiter himself. At that time, the waiter would only need to give his orders to the equipment. These devices would carry out his orders without any mistakes.

It was like a chisel. When an ordinary person brought it over, the most they could do was to carve it into a statue that looked like a human. However, after the hands of the waiter, the chisel could be made into a lifelike sculpture. It was almost no different from a superhuman sculpture. Sometimes, the tools were the same. What determined the height of the product was not the tools, but the brain and spirit of the creator.

Fortunately, the waiter shared the industrial technology with him. He happened to know how to create a truly advanced and world-leading product!

After examining the production equipment of the Volvo, Zhang Yunfeng discovered that there were only two problems at the moment. The first was the raw materials. This could be solved very quickly. The second problem was the processing of the mold and the manufacturing of finished products. All of these required him to build a high level processing base. However, this was not a big problem. As long as Nie Minhui helped him get the equipment in place, at that time, the waiter would be able to complete it himself.

At the same time, Zhang Yunfeng also began to plan his first development path after stepping into the Volvo. Currently, the biggest problem with the Volvo was not the hardware, but the software. First of all, the model of the car was old, and there were no good new models appearing in the world. Secondly, the technology was old, and there was no better development or improvement.

Therefore, Zhang Yunfeng was prepared to take out at least three models in the early stages of his land-landing battle against the automotive market. The first model was located between 150,000 and 200,000. Using a high-tech 1.4T engine, he was able to create an economically applicable low-end model. This model can be further refined. For example, the lowest configuration... Using a two-vans design, a high-tech configuration, a three-vans design... In terms of power, the low configuration would be able to reduce the turbine amplifier. In this case, the fuel consumption of the 1.4 engine was slightly lower than the current 1.4 engine. However, the power could reach the level of 2.0.

As for the high-speed version, the turbine amplifier would have to be added to make the fuel consumption of the car comparable to the current 2.0 naturally inhaled car. The power of the engine could reach the level of 2.8 engines. If that was the case, the performance of 200,000 cars would be able to kill at least 300,000 cars in an instant. However, the fuel consumption did not increase.

Another model would be the main commercial vehicle in the Middle-end market. This type of car was priced between 300,000 to 400,000. However, the engine had to be at least 2.0. If the power boost was not added, the performance would be comparable to the current Audi A6 2.8 Natural Breaker version. If they added a pressure amplifier, their power would be about the same as the current 3.2 liters of engine power. The fuel consumption would be about the same as the current Volkswagen Maitten.

The last car model was not suitable to enter the high-end luxury car market for the time being. However, the price was at least between 500,000 to 700,000. Other things aside... In terms of performance, it had to be equipped with an engine of at least 3.0, a low-compressor that was comparable to the Audi A8 version of 4.5 liters. If they added the hydraulic device, it would be comparable to 4.7 liters of Mercedes-Benz S500.

Of course, the main focus of these positioning was the power enhancement. As for the soft configuration, these could be adjusted according to the actual situation. Soft configurations did not contain any technical components. However, the cost had to be increased. For example, navigation, steering wheel changing gear, real leather seats, electric modulation memory seats, seat heating, seat ventilation... As well as dual temperature zones and so on.

Soft configuration could be directly purchased from the supplier. However, stronger power, smaller fuel consumption, and higher cost-performance ratio were the core elements of Zhang Yunfeng's main focus.

Zhang Yunfeng also knew that the people of China most likely had some conflicting thoughts about the purchase of domestic vehicles. Over 200,000 yuan, basically no one would buy a domestic car. All of them were joint-venture cars and even imported cars, but Zhang Yunfeng believed it. Once his performance and fuel consumption could be greatly improved, the pride of the people in the country would also gradually increase. When that time came, coupled with his real price-performance ratio, the people in the country would slowly accept it.

The most important thing was that Zhang Yunfeng not only had the best industry standards. He also knew the details of every car in the future. Therefore, he could take out many super new and super attractive classic models.

Now, there were a few cars that relied on their skin to make a living, and they were selling very well. For example, Volkswagen CC, Land Rover Aurora, Innumeric FX35, the latest BMW 535 GT, Porsche Carts, and so on. Zhang Yunfeng casually took out a classic car model from the future. It was enough to instantly kill these cars that relied on their skin to make a living.

It had performance, cost-performance, and an extremely advanced appearance that attracted consumers. At that time, the sales of cars would not be a problem at all!

Zhang Yunfeng even prepared to take out the 2020 Land Rover Aurora model. As his first model of SUV, it would definitely be several times more beautiful than the current Land Rover Aurora. It was extremely reminiscent of cars. In order to pursue the appearance of Aurora Borealis, the current consumers... But what about the nature of Aurora Polaris? Its engine was actually the same as the 200,000 plus dollars of Forte Mondeo!

For the sake of its appearance, the consumers could spend 700,000 to buy a 2.0t car. What would they think when they faced the exterior of the car produced by Dong Chen in the future, which would be super-class, super technological, and cost-effective?

Thinking of this, Zhang Yunfeng was filled with optimistic anticipation and anticipation for the future of the Dongchen Automobile. He would use his absolute strength to reverse the attitudes of the people of China towards the domestic cars. He would let them know that pure domestic cars were not cheap cars with poor performance. Pure domestic cars could have better appearances, better performance, and better prices than imported cars. He also had a pride that he did not have at all!

After inspecting the complete production line of the Volvo engine, Zhang Yunfeng was quite satisfied. Everything was ready except for the east wind. He had to speed up the development of the next step.

On the side, Nie Minhui did not know what Zhang Yunfeng was thinking about. Seeing that it was about time, she said to the people beside her, "It's about time. Prepare to hold a mobilization meeting for everyone!"

The so-called mobilization meeting, Nie Minhui's meaning was to let the employees who were disappointed with the Volvo know. The new Volvo, which was the future Dongchen Automobile, would give them an unprecedented high reward. It would give them a strong hope that they had never seen before!

Zhang Yunfeng had long discussed with Nie Minhui about all the old employees who would take over the Volvo. He would give them a 50% increase in the original salary and first use the money to stabilize them. He would first use the money to let them see hope, and then the next step. Use the real products to let them deal with this factory... More confidence!

Nearly 2000 people were already waiting in the empty space of the factory. This was the place where they usually held the mobilization meeting. In the heyday of Volvo's nationalization, they would hold a mobilization meeting here every morning. After every day of the meeting, they would bring with them incomparable enthusiasm and hope. Go! Completing every day's work, but the later stages of the Volvo were extremely fatigued. Their hopes were constantly dashed. But today, for the Volvo... It was absolutely an unprecedented new life!

pqdm.com